• Inkless multimaterial printer that utilizes solid targets as printing sources with on-demand and in-situ dry nanoparticle generation and real-time laser sintering capability. • Capable of printing various metals, semiconductors, insulators, composites, etc.. • Full “Smart Manufacturing Interface (SMI)” software with system automation and design files to direct write ability, including: • Complete control of the printer (Ablation laser, sintering laser, Galvanometric scanner, target carousel, autofocus, stages motion, gas flow, light, vacuum pump, etc.) • Drawing tools (circuits and patterns can be directly drawn on the software) • Measuring • Logic commands (Loop, If) • Variables and data import (DXF, DWG, STP, IGES, Gerber, NC Drill/Excellon, TXT, CSV) • Assigning various process parameters to any of the lines in the file • Logging and data export • A target carousel holding six 1-inch diameter targets with automation and indexing capability • Removable 1-inch target holders/cups (6 total) • Ablation laser (60W) • Ablation laser scanner system with automated focusing capability • Sintering lasers (20W IR and 5W UV) with frequency and power tunability • Required optics and optomechanics with adjustable beam steering and focusing capability • Vision system for observing the print area and design alignment purposes • Motorized XYZ stage (20cmx20cm in XY travel and ~2cm Z travel) 0.006 mm repeatability • 20cmx20cm vacuum chuck and pump • Sampe height measurement • Mass flow controllers with up to 2000 sccm flow controllability (3 total) with one showing the chamber pressure. • Laser-safe enclosure (with the front door and a side panel providing laser-safe observation) • System Interlock • Lock on the door • Emergency shutoff • System operation light indicator • Print area filter system • micron nozzles with 100, 150, 200, 250, 300, 350, and 400-micron apertures • Less than 1KW power usage • Less than 250 Lb. weight • Less than 12 ft3 volume • On-site Installation and training • One-year warranty
