Work with selected concrete contractor to prepare underslab and insulated floor as per Cherokee Nation’s required standards Consider locations to ensure adequate distance from existing and new structures as required by manufacturer for airflow to condensing units Install outdoor insulated cooler boxes Install all refrigeration equipment Install roofing membrane Install all doors and seals Required electrical supply provided by owner (excluding pathways between condenser and evaporator) Contractor shall coordinate electrical needs, routing, and tie-in with owner throughout the project. Startup and test by general contractor and/or refrigeration contractor Unit Specifications: Cooler condenser voltages to be 460v 3-Phase (2) 14x20 Walk-in Freezers (Leer or comparable) Required Refrigeration equipment (Bally Trenton or comparable) Insulated 5.5” walls, 5.5” ceiling Freezer wood screed type and cove molding Finishes as 26ga galvanized, walls and ceiling, interior and exterior Ceiling shall be lag down type Door(s) description- HD1: Door freezer(-10deg), 60” x 78”, overlap mount, left hand hinge, interior and exterior same as wall Accessories required: (2) Vapor proof light (6) Kason 1277 hinges (2) Heated vent(s) (2) Digital/switch thermometer (2) Galvanized door trim caps (2) Heated door frames (2) Heated plug (2) Inside release push handles (2)1092 Door closer (2) Door strikes in brushed chrome (2) Support wheels
