3.1 12-inch aluminum extruded street name cap for 2-3/8-inch diameter pipe (no hardware). (SEE DRAWING A) 3.1.1 Sign to post installation. 3.1.2 Cap height shall be 1-3/4-inches. 3.1.3 No set screws. 3.1.4 Three holes, each 3-3/4-inches from center hole. Center hole shall be drilled 6.0 inches from each edge and 3/8-inch on center from bottom edge. 3.1.5 Slot height shall be 1-1/16-inches. 3.1.6 Slot width shall be 3/4-inch. 3.2 12-inch aluminum extruded street name T’s (no hardware). (SEE DRAWING B) 3.2.1 Sign to post installation. 3.2.2 No set screws. 3.2.3 Three holes, each 3-3/4-inches from center hole. Center hole shall be drilled 6.0 inches from each edge and 3/8-inch on center from bottom edge. 3.2.4 Slot height shall be 1-1/16-inches. 3.2.5 Slot width shall be 3/4-inch. 3.2.6 Bottom slot shall be set 90 degrees from top slot and shall be 12-0-inches long with three holes drilled as described in 3.2.3 above. 3.3 12-inch aluminum extruded street name cap for U-channel post (no hardware). 3.3.1 Sign to post installation. 3.3.2 No set screws. 3.3.3 Three holes, each 3-3/4-inches from center hole. Center hole shall be drilled 6.0 inches from each edge and 3/8-inch on center from bottom edge. 3.3.4 Slot width shall be 3/4-inch. 3.3.5 Sign angle: 90 degrees. 3.4 Extruded aluminum sign clamp with stainless steel hardware for 2-3/8-inch diameter poles. 3.4.1 Sign to post installation. 3.4.2 3/8-inch bolt thru sign mounting. 3.4.3 Clamps to 2-3/8-inch round posts. 3.4.4 Installs with only a 9/16-inch wrench. 3.4.5 360 degrees adjustable. 3.4.6 User for center mounting signs.
