1. BASE VEHICLE – Four (4) 2025 or newer/unused Ford F-250 Regular Cab 4X2 XL with Utility Service Body 2.1. Vehicle Snapshot 2.1.1 Model: F-250 Regular Cab RWD, 142” wheelbase(F2A) 2.1.2 Cab to Axle 56” 2.1.3 Engine: 6.8 2V DEVCT NA PFI V8 GAS (99A) 2.1.4 Transmission: TorqShift 10-Speed Automatic Transmission, SelectShift G (44F) 2.1.5 Interior color: HD Vinyl 40/20/40 Medium Earth Gray (AS) 2.1.6 Exterior color: Oxford White (Z1) 2.1.7 Wheels: 17” Argent Painted Steel (64A) 2.1.8 Tires: LT245/75RX17E BSW A/S (TD8) 2.1.9 50 State Emissions. 2.1.10 4 keys/fobs programmed and ready to use. 2.2. Factory Vehicle Options 2.2.1. Xl Chrome Package (96V) 2.2.2. Pickup Box Delete (Option Code = 66D) 2.2.3. Heavy Service Package (Option Code = 63R) 2.2.4. Upfitter Switches (Option Code = 66S) 2.2.5. Platform Running Boards (Option Code = 18B) 2.2.6. 120V/400W Outlet (Option Code = 43C) 2.2.7. Extra Heavy-Duty Alternator 240 amp (Option Code = 67E) 2.2.8. Front License Plate Brackets (153) 2. SERVICE BODY REQUIREMENTS 2.1. Approximate dimensions 96" long, 78" wide, 40" high. Knapheide 796 or comparable in quality, construction, compartment sizes, and warranty. 2.2. Automotive bulb-type neoprene seals on all door frames. 2.3. Paddle-actuated rotary latches with locks, all keyed alike. 2.4. Master locks for compartments on both sides of body. 2.5. Door hinges shall be continuous type, constructed of stainless steel. 2.6. Door retainers, double spring over-center, on all vertical doors. 2.7. Body walls and compartment floors constructed using minimum 14-gauge steel, with galvanneal coating on both sides. 2.8. Body doors should be double panel with hat section reinforcements, constructed using minimum 20 gauge steel with galvanneal coating on both sides.
