TRACK MARKING REQUIREMENTS: 1. APPLICATION OF MARKINGS SHALL BE PERFORMED BY AN EXPERIENCED TRACK PAINTER WITH SUITABLE EQUIPMENT AND KNOWLEDGE OF THE RELATIVE POSITIONS OF THE DESIGNATED POINTS TO THE PAINTED MARKINGS. 2. ALL 400 METER LANE LINES, START AND FINISH LINES, AND EVENT MARKING SHALL BE ACCURATELY POSITIONED AND MARKED IN ACCORDANCE WITH THE CURRENT SPECIFICATIONS OF THE NATIONAL FEDERATION OF STATE HIGH SCHOOL ASSOCIATIONS (NFSHSA), 816-454-5400. 3. A DRAWING SHOWING THE PROPOSED MARKING LAYOUT SHALL BE SUBMITTED BY THE CONTRACTOR FOR APPROVAL PRIOR TO APPLICATION OF ANY LINES ON THE TRACK SURFACE. 4. MARKING PAINT SHALL BE AS APPROVED BY THE MANUFACTURER FOR APPLICATION ON THE SURFACE COURSE FINISH MATERIAL. PAINTING SHALL BE PERFORMED BE SKILLED PERSONS IN A WORKMANLIKE MANNER IN ACCORDANCE WITH THE MANUFACTURER'S INSTRUCTION. 5. UPON COMPLETION OF THE MARKING THE CONTRACTOR SHALL FURNISH THE OWNER WITH FIVE COPIES OF A DRAWING SHOWING ALL LINES AND MARKING THAT HAVE BEEN APPLIED. THE DRAWING SHALL CONTAIN A STATEMENT SIGNED AND SEALED BY A PROFESSIONAL LAND SURVEYOR, CERTIFYING THAT MONUMENTATION AND THE LINES AS THUS MARKED ARE IN ACCORDANCE WITH THE RULES OF NFSHSA. NO MINUS TOLERANCE IS ALLOWED FOR THE LENGTH OF ANY EVENT. 6. REFER TO SPECIFICATION SECTION 325000 FOR ADDITIONAL SURFACING AND MARKING REQUIREMENTS.
