. Concrete Curb Ramp Adjustments and Landing Area Compliance ● Objective: Modify curb ramps and landing areas to meet ADA guidelines. ● Tasks: ○ Regrade landing areas with slopes over 1:48 to ensure levelness. ○ Install ramp flares at 1:10 slope where necessary. ○ Construct curb ramp flares and install tactile warning surfaces. ○ Inspect completed ramps and perform final adjustments. 2. Accessible Parking Space and Aisle Adjustments ● Objective: Adjust parking spaces and access aisles to meet width and layout standards, as per ADA requirements. ● Tasks: ○ Repaint standard accessible spaces to be at least 8 feet wide with a 5-foot access aisle. ○ Reconfigure van-accessible spaces to 11 feet wide with an 8-foot access aisle. ○ Relocate any obstructions, such as poles and fences, impacting access. 3. Site-Specific Modifications ● Section A and B: ○ Regrade two sidewalk slopes, installing new ADA crosswalk detectors for compliance. ● Section C: ○ Remove and relocate two crosswalk curb cut-outs. ○ Install new 5-foot curb cut-outs with 1 ½-foot wings and ADA detectors for accessibility. ● Section D: ○ Replace the existing 4 ½-foot sidewalk with a new 6 ½-foot sidewalk extending to the backside of the new curb gutter. ○ Install three new 5-foot curb cut-outs with 1 ½-foot wings (relocating two and replacing one existing). ● Sections D and E: ○ Restripe parking spaces to accommodate seven new ADA parking spaces and four new van-accessible spaces. ● Section F: ○ Convert five spaces from ADA to standard parking spaces with updated striping. 4. Signage Installation for Accessible Spaces ● Objective: Install ADA-compliant signage for accessible and van-accessible spaces. ● Tasks: ○ Install "International Symbol of Accessibility" signs at all designated accessible spaces. ○ Position signs at a height of 60 inches from the ground. ○ Add "Van Accessible" signage where applicable. 5. Final Striping and Markings ● Objective: Complete final re-striping of all parking areas and accessible spaces. ● Tasks: ○ Mark accessible spaces, access aisles, and walkways. ○ Ensure high-contrast striping for visibility. ○ Conduct a final inspection to confirm ADA compliance
