Please provide a proposal for a lump sum to furnish all material, labor, safety equipment, and lifting equipment for the scope of work described below. a) ASPHALT PAVING: BOARD OF ELECTIONS, 150 Riddleville Rd (app. Area of 22,500 sq.ft) - Prep and Mill out parking lot and haul off millings - Base in with Crush & Run if needed at all then compact - Then pave lot with 2.5” of 9.5mm hot mix asphalt and compact to smooth finish - Re-stripe all parking lines and handicap spaces as needed. Prepare and clean the existing roof to accept the retrofit system as directed by the manufacturer. b) ASPHALT PAVING: CHAMBER OF COMMERCE OF WASHINGTON COUNTY, 603 S Harris St, ( APP. Area of 35,000 sq.ft.) - Prep and mill out along curb & gutter( haul away millings) - Remove speed bumps - Install Tack Coat Adhesive - Re-cap lot with 2” of 9.5mm Hot mix asphalt and compact to smooth finish - Place speed bumps back where they belong - Re-stripe parking lines, arrows and handicap spaces as needed. c) ASPHALT PAVING: ROSA M. TARBUTTON MEMORIAL LIBRARY, 314 S Harris St (app. Area of 50,000 sq.ft.) - Clean & prep parking lot - Crack fill cracks with gator patch ( this WILL NOT make cracks disappear, but will help prevent further water damage) - Seal coat entire lot with 2 heavy coats of commercial grade sealer - Re-stripe all parking lines and handicap spaces as neededFurnish and install a new edge metal at gutter, new coping, new gutters, and new downspouts where required. Trim to be shop-fabricated...