Description and Scope of Work Quantity: 1 Search and Recovery Boat meeting or exceeding the following specifications. • Boat Length- Between 20’-21’ long • Material- All-Welded Aluminum with flat flooring (Not ribbed), 5052 Minimum • Line-X type material for flooring/decking • Center Console w/Front seat cushion, windshield, grab rail, 12V accessory Outlet with USB Port (On Side) • (2) extra cushion seats, with backs, for rear seating area • Standalone digital depth gauge on console • (4) auxiliary switches mounted on console with, power and ground to switch bank, 16 gauge power ground wire pairs pre wired from switch panel to stern corners, two each side. • All wiring marked at ends with purpose • Hummingbird Apex 19 MEGA SI+ - XM 14 HW MSI T- SOLIX MEGA SI+, DI+, Dual Spectrum CHIRP W/ TEMP TRANSOM TRANSDUCER - MKR MI-1 HELIX Adapter Cable - AS GPS HS- External GPS Receiver with Heading Sensor (Adapter if needed) (Mounted - I Pilot Link to Trolling Motor • Cranking battery w/battery cut-off switch at battery, Battery tender • Delete LiveWell plumbing, keep compartments as storage. • Manual Bilge Pump • Hydraulic Steering w/tilt wheel • Lean-post w/cushion • Minimum 35 Gal Built-in fuel tank • Trolling motor bracket w/ all applicable wiring (6 Ga.) for the below listed trolling motor. • Minn Kota Bow Mounted Trolling Motor with Spot Lock • LED Navigation Lights • Ladder on rear, Flotation Pods • Minimum 115 HP 4-stroke Outboard w/outboard protection bar • Hydraulic Jack plate
