1. Demo the existing tub/shower and shower trim kit. Include dumpster, hauling and disposal fees. 2. Supply and install Flexstone Royale Alcove Shower Surround Kit for openings up to (approximate) (GENERAL CONTRACTOR WILL VERIFY ACTUAL SIZE) 60” W x 32” D x 80” H. Include supply and install (2) 15 inch corner shelves. Supply and install Flexstone single threshold shower base with correct sided drain opening. All component color and finish to be selected by “ELDER”. Contractor shall include all materials and labor necessary for installation per manufacturer’s instructions, including but not limited to the shower drain and backer boards for walls. Contractor is responsible for field measuring to ensure that new tub fits in the opening without leaving a gap in the flooring at shower edge. 3. Contractor shall supply and install plywood backer for the shower surround and grab bars. 4. Contractor shall include all costs associated with moving plumbing to align with the new showers. 5. Remove all flooring and provide and install new Vinyl Plank flooring. Replace any damaged sub-floor and underlayment. 6. Contractor shall include all costs associated with adjusting the opening to fit the new shower. Shower shall fit without leaving a gap in the flooring at shower edge. 7. Supply and install Seachrome 24”w x 15” wall mounted folding shower seat, white phenolic with 3” slats. (or comparable to be selected by owner based on availability) 8. Supply and install grab bars in shower per MN Accessibility Code. 9. Modify existing shower valve assembly to eliminate tub spout (shower function only) Existing shower head may remain in place. Contractor shall include installation of a shower divertor valve and install Moen handheld showerhead combo with slide bar (Moen 3667EP) chrome finish. 10. Remove existing and provide / install a new cub cadet handicap model toilet complete.
