GENERAL DESIGN REQUIREMENTS 3.1. The switchgear and switchgear building shall be designed, manufactured, assembled, insulated, and tested in accordance with the latest applicable State and Federal Laws and all applicable codes and regulations in effect at the time of the switchgear and building construction including, but not limited to: ANSI/IEEE, AISC, NEMA, NFPA, NEC, NESC, AWS, OSHA, SDI, and ASTM standards except where specific requirements of these specifications conflict with these standards. In the event of any conflict between Specifications and Codes the more stringent requirements shall apply. 3.2. The switchgear and building shall be of the highest commercial quality as to material, workmanship, and design. All components and materials used in the construction of the apparatus shall be selected as the best available for the purpose for which used, considering strength, ductility, insulation, and best engineering practice. Liberal factors of safety shall be used throughout the design. 3.3. All materials and equipment shall be completely factory built, assembled, wired, and tested. All equipment and components shall be new and of first quality and shall conform to these specifications, as well as, any codes governing the use of the material.
