OMPA is requesting quotes for steel poles to be delivered to 1 site in the State of Oklahoma (Marlow, OK). All poles shall be designed for direct embedment. Poles shall be hot dip galvanized with a welded butt plate and top cap. Butt plate design shall allow for drainage of water from the interior of the pole. A suitable UV stabilized below grade coating of at least 20 mils shall be applied based on the height of the poles and expected burial depth (10% of the pole length plus 3’). Jacking nuts and up to 28 pre-drilled holes per pole shall be provided. Two (2) zinc coated grounding inserts shall be included at the top of the pole and two (2) at ground level for connection to a static wire and ground rod(s). Each pole shall be permanently marked 60” above the groundline with the manufacturer’s name, month and year of manufacture, length and class of pole, ultimate moment capacity of the pole, owner’s name (as shown below) and pole weight.
