1 96 EACH NAICS 335999 Matl Code 1575821 EA CABLE TERMINATION KITS, 35KV, INVERTED SKIRTS, 750-1000 KCMIL, HEAT SHRINK. CABLE INVERTED TERMINATION SHALL BE IN COMPLIANCE WITH THE FOLOWING: TERMINATORS SHALL UTILIZE A COEXTRUDED ZINC OXIDE MASTIC POSITIONED THROUGHOUT THE ENTIRE INTERIOR LENGTH OF A NON-TRACKING HEAT SHRINKABLE POLYMER. HEAT SHRINK COEXTRUDED TERMINATOR SHALL REQUIRE ONLY A SINGLE TUBE FOR INSTALLATION AND QUALIFICATION TO IEEE-48 CLASS 1 OUTDOOR PERFORMANCE. DESIGN SHALL NOT REQUIRE A SEPARATE ELECTRICAL STRESS CONTROL TUBE. TERMINATOR SHALL NOT EXCEED AN INSTALLED LENGTH OF 19 INCHES. TERMINATOR SHALL BE SUITABLE FOR DEPLOYMENT ON COPPER TAPE, WIRE SHIELD, LC SHIELD, AND JCN CABLE CONSTRUCTIONS. TERMINATORS SHALL BE SUITABLE FOR VERTICAL UP OR VERTICAL DOWN INSTALLATION. KITS WILL HAVE AN UNLIMITED SHELF LIFE. HV NON-TRACKING POLYMER SHALL BE SURFACE PRINTED WITH MANUFACTURER LOT NUMBER. KIT SHALL INCLUDE DWP APPROVED INSTALLATION INSTRUCTIONS SEE SAMPLE ATTACHED. ONLY APPROVED MANUFACTUERS LISTED BELOW. ALL OTHER MANUFACTURES MUST BE APPROVED BY POWER SYSTEM ENGINEERING DIVISION, DEVELOPMENT & STANDARDS GROUP.
