PROFESSIONAL SERIES TACTICAL SAFETY VEST SPECIFICATIONS – UNISEX Flying Cross by Fechheimer Item: 71500 86 Meets ANSI/ISEA 207 – 2006 / 3rd Party Certified FABRIC: Content: 100% polyester background fabric and mesh 3M Scotchlite Reflective Material #8725 Weight: Vis-Stop Ripstop is 2.2 oz/sq yd with DWR coating Breath-flex Mesh is 3.4 oz/sq yd BACKGROUND COLOR: Hi-Visibility Yellow STYLE: Vest style with zipper front. Generous full cut with adjustable hook and loop tabs on the sides. 5-point breakaway feature prevents entanglement. Shorter front to allow easy access to duty belt. Longer back for added visibility. Webbing epaulet on each shoulder provides functional utility. Pen pocket on left chest. Reinforced badge tab on left chest. FRONT: The background fabric is Vis-Stop Ripstop. V-neck style closes with a #10 Lenzipcoil zipper. The left side of the zipper tape is sewn to hook material. A matching piece of loop material is sewn to the inside of the left side of the vest. This feature provides a breakaway point. There are two vertical stripes, one on the left side, one on the right side. Each stripe is 4.4375” wide. The outside ¼” edge of each stripe is Navy, followed by 1” wide reflective. The Hi-Vis yellow center zone is 1.9375” (+.0625”/-.25”). There are two horizontal stripes, one on the left side, one on the right side. Each stripe is 4.4375” wide. The outside ¼” edge of each stripe is Navy, followed by 1” wide reflective. The center zone is 1.9375” (+.0625”/-.25”). The center zone of the left and right stripes is Navy and may be lettered. There is a pencil pocket on the left side, adjacent to the inner side of the vertical stripe. Top opening measure 1 ¼” wide. Length is 5”. It is made of matching Hi-Vis Yellow fabric. The front and back panels are not permanently stitched together. At the top of each shoulder on the front panels is a 1” wide piece of hook material for attachment to the back panels. At the side of each front panel, approximately 2” up from the bottom is a 4” x 4” piece of loop material for attachment to the back panels. In the center of the left vertical stripe, there are two vertical buttonhole eyelets 1 1/8” long, spaced 5/8” apart from inner edge to inner edge, finished in matching thread.
