All correspondence must be made through the Vendor Portal. Major Yearly Generator Inspection performed once a year in October. Generac/250kw, Model: 14365310100, Serial #: 2116343. This inspection will include the following items: Major Lube, oil and filter change (Once/year)Fuel filter change (Once/year) Check air cleaner (Once/year)Check coolant level Test anti-freeze and adjust Inspect belts condition Check engine heater operation Inspect air intakes and outlets Check transfer tank operation (if applicable)Drain exhaust line Inspect silencer Check battery charger operation and charging rate Check battery electrolyte levels and specific gravity Emergency system operation without load transfer Emergency system operation with load transfer(lf allowed) Frequency check/governor adjustment Confirm transfer switch and accessory operation Check alternator charge rate Confirm engine and generator gauge operation Confirm generator controller operation Check unit output voltage and adjust as necessary Check Fuel Tank Level (if applicable)Inspect Fuel Line and Electrical Connections. Valid Period 10/01/2024-09/30/2025. SEE ATTACHED SPECS. Vendor must be a Certified Generac Techician. **Price is per Major Inspection**
