Specifications include, but are not limited to: Schedule 1; PIPE, COPPER; All copper pipe must be equivalent to the following: • Pipe to be seamless. • Must conform to ASTM Specification B-88-62 "TYPE K SOFT" • ¾” & 1” pipe must be in 60 foot rolls only. • 2” pipe to be in 40 or 60 foot rolls as requested by purchaser. • Price must be on a per foot basis. PIPE, BRASS; All brass pipe must be equivalent to the following: • Pipe to be seamless. • Must conform to ASTM Specification B-43 Red Brass (Copper Alloy C230). • Price must be on a per foot basis. Schedule 2; PIPE, DUCTILE IRON; 4” thru 12” Ductile Iron Pipe will be Class 350. 14” and Larger Ductile Iron Pipe will be Class 250. Compression type joint. Pipe must meet requirements of ANSI, AWWA C151/A21.51, and Federal Specifications. Plain end of pipe should be beveled. Pipe must come complete with gaskets (ANSI, AWWA C151/A21.51) and joint lubricant. Pipe is to be cement lined in accordance with Specifications ASA A21.4 (AWWA C104) and/or Federal Specifications WW-P-421B. Pipe is to have a bituminous seal coat, NSF 61. All pipe must be new and shall be manufactured in accordance with ANSI/AWWA C151/A21.51 in the United States of America (USA); all ductile iron pipe shall be cast, cleaned, lined, coated, tested, and certified at a manufacturing facility located in the USA. The raw material for ductile iron shall have an average minimum content consisting of at least 90% or more recycled ferrous scrap iron and steel. Bids must be on a price per linear foot basis. PIPE TO BE ORDERED AS NEEDED.
