Specifications include, but are not limited to: A durable imprinted aggregate reinforced preformed thermoplastic pavement marking system (herein "System") that provides a textured, highly attractive and durable topical treatment to the surface of asphalt pavement. Typically the system replicates, in relief, the grout lines common to brick or other types of unit pavers, but may also be used to create other patterns. It is intended for use on asphalt pavements to create traffic calming solutions and decorative crosswalks, medians, intersections and through areas in parking lots. It provides a seamless, aesthetic look without the trip hazards and ongoing maintenance often associated with pavers and stamped concrete. 1.1 The aggregate reinforced preformed thermoplastic is typically supplied in panels measuring 2 ft. x 2 ft. [±Ya in.] (.61 m x .61 m [±3mm]) The System must be able to be applied to asphalt surfaces without preheating the application surface to a specific temperature. The System must be able to be applied in temperatures down to 45°F (7°C) without any special storage, preheating or treatment of the material before application. The contractor shall provide the owner with a labor and materials or payment bond executed by a surety company licensed by the Commonwealth of Massachusetts.
