Specifications include, but are not limited to: TYLER CREEK SLAB, located in Kanawha County, West Virginia. The structure carries West Virginia Route (WV) 62 over Tyler Creek and is located approximately 0.32 mile north of County Route (CR) 25/25. The existing structure consists of a simple concrete slab span, supported by full height reinforced concrete abutments. The overall length of the structure, from out to out of backwalls, is 24 feet – 7 inches. The BARS Number is 20A374 and the Bridge Number is 20-62-0.63. This project shall consist of the preparation of contract plans and related documents for the construction of a new bridge on the existing alignment with traffic being maintained on a temporary detour upstream. The professional services include related documents, surveying, and traffic engineering services. A Design Study will not be a part of these services. The Consultant shall reference DD-681 and develop the appropriate Traffic Management Plan, which will also be required. The Consultant shall reference DD‑506 and use pollution prevention and discharge reduction methods in the design. As part of the WVDOH's desire to facilitate safety discussions for transportation projects, the Consultant shall complete and submit to the Traffic Engineering Division, the Safety Assessment for Every Roadway (SAFER) Form for the project as part of the Preliminary Field Review and Final Office Review. NEPA Documentation will be handled in-house by the Technical Support Division. Post Design Services, if required, shall be by a separate Agreement.
