Specifications include, but are not limited to: 3.1.1 Coveralls (Red Kap Uniform Coverall Long Sleeve CT10 or equal) 3.1.1.1 Must be made with a cotton/polyester twill. 3.1.1.2 Must have a full zippered front closure. 3.1.1.3 Must have a collar attached. 3.1.1.4 Must have at least two set-in front pockets. 3.1.1.5 Must have at least two chest pockets. 3.1.1.6 Must have at least two patch hip pockets, allowing access to clothes under coveralls. 3.1.1.7 Must have at least a one-piece ruler pocket. 3.1.1.8 Must be customizable with multiple WVOMHST embroidered logos or screen printed. 3.1.1.9 All branding or logos must adhere to Exhibit B Branding Guidelines. 3.1.1.10 Must have stitched patch of American flag on the left arm. 3.1.1.11 Must have a stitched patch of the WV State Seal on the right arm. 3.1.1.12 Must have reflective bands on each upper arm, mid-calf, and a crisscrossing reflective strip on the upper back. 3.1.1.13 Must come in Navy Blue. 3.1.1.14 Must come in sizes equivalent of 34 to 70 long. 3.1.2 Bib Overalls (Carhartt Men's Loose Fit Firm Duck Insulated Bib Overalls 104393 or equal) 3.1.2.1 Must be 100% cotton. 3.1.2.2 Must have adjustable over the shoulder straps, with buckle closures on the chest. 3.1.2.3 Must have two or three snap closures on each side of the waist. 3.1.2.4 Must have a zippered fly in the front. 3.1.2.5 Must have at least one chest pocket, two front utility pockets, and two rear pockets. 3.1.2.6 Must have a hammer loop on one leg. 3.1.2.7 Must come in Navy Blue and/or Black. 3.1.2.8 Must be customizable with multiple WVOMHST embroidered logos or screen printed. 3.1.2.9 All branding or logos must adhere to Exhibit B Branding Guidelines. 3.1.2.10 Must come in sizes equivalent of small to 3x long.