The awarded vendor is responsible for obtaining all needed permits and licenses. The State reserves the right to require any permits and licenses from vendors. Installed sign shall conform to UL standards and National Electric Code Item # 1 Demolition and removal of existing sign. Contractor shall provide all necessary equipment and labor to demolish, remove and dispose of existing sign and structures, including steel columns down to the top of the footings, cap off steel and leave on site. Item #2 Installation of New fabricated sign including labor and materials, or design equivalent. Refer to illustration on page 14 A. Overall size of the sign shall not exceed 30’ Height x 14” (20” with LED signs attached to frame of sign) Deep x 13.25’ Wide from peak of sign. Structure to be fabricated from aluminum material. B. Double sided internally illuminated 59” Height x 159” Wide, white pane face with Isothermal Community College logo, college’s blue color C. Double sided Daktronics Galaxy Outdoor Electronic Message Center GS6 series, model GS6-120x225-15.85-RGB-2v or functional equivalent 1. Cabinet Dimensions 69” Height x 159” Wide 2. Active LED area: 6’ 3” Height x 11’ 9” Wide (Approximate Dimensions) 3. Line Spacing: 15.85mm 4. Matrix: 120 lines x 225 columns 5. LED Color: RGB- 281 trillion Colors 6. Max Power: 2620 watts/display 7. Display configuration: 2V-two one sided displays same content 8. Frames per second: 60 D. Galaxy External Temperature Sensor with 25 ft Quick Connect Cable or functional equivalent E. Daktronics 4G Ethernet Modem with Daktronics Lifetime 4G Cellular Data Plan Per modem or functional equivalent with an option for fiber optic connectivity Item #3 Venus Control Suite Basic or functional equivalent A. Web-based software for display editing and management of LED signs. Item #4 Training The awarded vendor shall provide up to 3 hours of training for up to five employees with the web-based editing software.
