Specifications include, but are not limited to: 1 80 EACH NAICS 335313 Matl Code 1937118 EA SWITCH, SIDE-BREAK, 600-AMPERE, 34.5 k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eriod QTY UOM PRICING UNIT PRICE 2 80 EACH 3 80 EACH 2 70 EACH NAICS 335313 Matl Code 1937121 EA SWITCH, SIDE-BREAK WITH MOUNTING BRACKET FOR K-LINE INSULATOR, RISER POLE CONSTRUCTION, SWITCH RATED 600-AMPERE, 34.5 kV, 200-KV BIL WITH LOAD BREAK ATTACHMENTS, WITH INTERRUPTER SHUNT ALLOWING FOR A DISTANCE OF 2-5/8 INCHES OF SEPARATION BETWEEN THE INTERRUPTER TRIP ARM WITH TOGGLE-BACK CAPABILITIES AND THE SWITCH BLADE INTERRUPTER PICKUP ARM, PRE-ASSEMBLED ON A SINGLE METAL ARM FOR RISER POLE FACE MOUNTING. THE DESIGNATED TOP END OF THE SWITCH MOUNTING BASE SHALL HAVE A BRACKET FOR MOUNTING A K-LINE POST WITH A 3/4-INCH BOLT. THE STATIONARY 2-HOLE NEMA TERMINAL PAD SHALL BE PARALLEL TO THE INSULATOR CENTERLINE. THE SWITCH ROTATING LEVER ARM AND INTERPHASE PIPE SHALL BE INSTALLED BETWEEN THE ROTATING AND FIXED SILICON INSULATORS, AND ABOVE THE MOUNTING BASE. THE PRE-ASSEMBLY WHEN CRATED SHALL REQUIRE NO ADJUSTMENTS FOR INSTALLATION AND SHALL BE SHIPPED IN A NON- RETURNABLE WOODEN CRATE WITH TOP AND SIDES ATTACHED TO A WOODEN PALLET BY STEEL STRAPS. THE CRATED ASSEMBLY SHALL CONSIST OF 3 SINGLE AIR SIDE-BREAK SWITCHES, SILICON TYPE STATION POST INSULATORS, ROTATING INSULATORS SHALL INCLUDE 2 DOUBLE SEALED STAINLESS STEEL BALL BEARINGS, INTERPHASE PIPE, REVERSE LEVER ARM TYPE 2 DOUBLE-SEALED STAINLESS STEEL BALL BEARINGS BELL CRANK, AND A CONTROL HANDLE WITH CLAMPS FOR ONE-INCH FIBERGLASS CONTROL ROD. THE SWITCH ASSEMBLY, CRATING AND STENCILING SHALL BE AS SPECIFIED IN TECHNICAL SPECIFICATIONS OF THIS BID AND DRAWINGS OA647-04, -23, -31, -32, -36, AND OD645-05 "INERTIA" P/N LBS36SLAR12TAP STATE MANUFACTURER/BRAND AND PART NUMBER
