This Contract requires complete electrical repair on top of seven (7) high mast light poles in the WCI open field. The Contractor shall be responsible for all work related to providing a fully operational lighting system as specified. The work shall include, but not be limited to: removal of the existing corroded electrical boxes - two (2) per pole or fourteen (14) in total, for the high mast lights and any corroded wiring. Installation of two (2) new 10” x 12” x 6” stainless steel boxes and related wiring. Supply and install code compliant steady burningdouble aircraft obstruction lights and fixtures, cast aluminum housing, aviation red & threaded globes with gasket seal for 120v application, one double on the top of each pole, seven (7) poles or a total of seven (7) double lights. The fixture must use stainless steel (ss) hardware and safety cable attached from the fixture to the globe. The removal and replacement of corroded wiring or conduit to comply with the manufacturer specifications and applicable codes. The permits, labor, materials, services, supplies, electrical hookup and testing must be completed by a licensed electrician and all moving, rigging and transportation services for existing and new equipment is the responsibility of the awardee and included in the base bid.
