Specifications include, but are not limited to: 15kV, 110 kV BIL Solid Dielectric Insulated Padmount Switch, Catalog No. PLS41-376-12-12FB Way 1: Three Phase epoxy encapsulated load break switch 630 Amps continuous and loadbreak. 20 kA asym. momentary, and close-into-fault rating. 600A Deadbreak Apparatus Bushings per IEEE 386 interface 11 Ways 2, 3, and 4: Three Phase epoxy encapsulated fault interrupter switch 630 Amps continuous and loadbreak. 12.5kA sym. maximum interrupting rating 1000:1 internally mounted current transformers 600A Deadbreak Apparatus Bushings per IEEE 386 interface 11 Standard Features: Front/Back Access to switch operators and bushings Welded stainless steel mechanism cover painted light gray (ANSI 70) Mild steel frame Parking stands for all bushings C57.12.28 standards Enclosure painted Padmount Guardian Green, Munsell #7.0GY3.29/1.5 -13 NC grounding provisions Padlockable operating mechanism padlocks are not included Green/ OPEN Red/ CLOSED labeling Additional Features: 12 gauge galvanized steel low voltage enclosure Ways 2, 3, and 4 are equipped with quantity two auxiliary Form C contacts wired to the control cabinet for use by the control One (1) potential transformer mounted internal to the switch tank connected directly to the main bus, for control power suitable for phase to phase connection on a 12,470 V phase to phase system included and factory installed. Switch is equipped with a 200 A Deepwell Bushing disconnect switch, connected in parallel with the Way 4 bushing, to be used for the primary connection of the PT to the switch. Capacitively coupled voltage sensors included on Ways 2, 3, and 4 bushings. Low energy analog output wired to control cabinet for use by the control NEMA 4 control cabinet, including: o Three (3) SEL 751, MOT: 751002B1B1B0XL1A620, relays to provide: Overcurrent protection for ways 2, 3, and 4. Voltage monitoring on Ways 2, 3, and 4 o Power supply o Battery backup o 120 VAC convenience outlet o Document holder o Padlocking handle
