Specifications include, but are not limited to: Repairs and resurfacing of tennis courts must include the following: •Surface preparation must include cleaning and scraping all courts of loose material, dirt and debris; patching any depressions holding more than 1/8” of water after being allowed to drain for one hour using an acrylic patch material; repair and patch any structural cracks, dings, etc., in the asphalt surface using an acrylic patching material. •Court surfacing should include: o applying two (2) coats of Novasurface sand filled acrylic resurfacer (or equivalent) to the entire court surface, as a filler coat, following the manufacturer’s and application directions. o applying two (2) coats of Nova Combination Surface, sand filled acrylic latex compound (or equivalent) to the entire court surface as a texture coat and a finish coat, following manufacturer’s and application directions. o court colors will match existing colors as shown on Attachment A; Blue for playing surface and Green for non-playing surface. • Prior to painting playing lines, provide one (1) coat of Nova Seal-A-Line (or equivalent) to seal tapes for a crisp, sharp line edge. Layout, tape and hand paint 2 inch wide playing lines using Novatex, textured acrylic white line paint (or equivalent). • Clean net posts of all rust, then spray paint using Rustoleum rust preventative paint; install new nets and hang to correct height and tension; clean job site and dispose of all debris. • Provide alternate estimate option to resurface as specified in the scope of project except install Fortress 97423 polyester fabric (or equivalent) over the entire court surface. Fabric should include a minimum of a two-year warranty against the appearance of cracks over the entire surface.
