BLENNERHASSETT MIDDLE SCHOOL 1. Remove base board in hallways. 2. Hallways and Art Room- CMU walls need caulked then apply 1 full coat of Sherwin Williams Extreme Bonding Primer. Then apply 2 full coats of Sherwin Williams Pre-Catalyzed Epoxy. 3. Metal Panel Walls- Sand walls to remove loose paint and to ensure adhesion. Apply 1 full coat of Sherwin Williams Extreme Bonding Primer, then apply 2 full coats of Sherwin Williams PreCatalyzed Epoxy. 4. Door Frames and Windows on Hallway Walls- Sand metal frames to ensure adhesion. Apply 1 full coat of Sherwin Williams Extreme Bonding Primer, then apply 2 coats of Sherwin Williams PreCatalyzed Epoxy. 5. Wood Panel Doors- Sand and clean then apply 1 coat of Sherwin Williams Stain to match existing and apply 2 coats of Sherwin Williams Polyurethane. 6. Bronze Trim- Sand and clean trim then apply 1 full coat of Sherwin Williams Extreme Bonding Primer. Apply 2 coats of Sherwin Williams Pre-Catalyzed Epoxy. 7. Apply New Vinyl Cove Base in Hallways and Art Room. AUDITORIUM 1. Remove Existing Vinyl Base 2. Cover Wood Wall, Floor, Seats, Stage & Curtains 3. Remove seats as needed to erect scaffolding 4. Patch drywall and remove defective plaster and patch using Structo-Lite Plaster Material. Also repair Splatter coat on ceiling where previously applied using like materials. 5. Spot Prime patches using Sherwin Williams Pro Mar 200 Primer 6. Apply 2 coats of Sherwin Williams Pro Mar 200 Eggshell on walls and ceilings 7. Frames- Sand and clean then apply 1 full coat of Sherwin Williams Extreme Bonding Primer. Apply 2 full coats of Sherwin Williams Pre-Catalyzed Epoxy. 8. Wood Panel Doors- Sand and clean then apply 1 full coat of Sherwin Williams Stain to match existing. Apply 2 full coats of Sherwin Williams Polyurethane. 9. Install New Vinyl Base
