Performance of this conversion shall be aligned with the materials requirements indicated in the Compliance Pages as well as the following specifications: 1. Pressure wash courts to clean out cracks and remove all mold/mildew 2. Repair all existing cracks with tape and crack filler made for tennis/pickleball courts 3. Fill minor cracks with rubberized nova caulk 4. Route all cracks larger than ¼” wide to accept patch repair material per Compliance specification 5. Prior to resurfacing, fill all low spots over 1/8” per American Sports Builders Association (ASBA) specifications with acrylic binder 6. Apply one (1) acrylic factory textured filler coat to all patches and repairs 7. Sand and smooth patches 8. Install four coat color system and pickleball lines 9. Color of courts should be blue and green with white lines 10. Install six (6) sets of pickleball posts, nets and center straps 11. Pickleball Net Posts shall be Edwards 3” Classic Round, item 1371705, or equal 12. Pickleball Nets shall be Edwards 36”, item 1296778DS, or equal 13. Existing tennis poles and nets will remain as barrier between courts
