Specifications include, but are not limited to: 1. The 102d Intelligence Wing (IW) has a main gate entry facility that requires replacements of solid steel doors and frames with aluminum storefront, narrow-stile doors. 2. Contractor proposal shall include all cost associated with material, labor, equipment, transportation, storage, GAOH, to provide the following: a. Building 750, Guard Shack i. Remove and dispose of 2ea. existing doors, to include closer, panic hardware, knobs, hinges, kickplates, etc. 1. Mass ANG requires the lockset to be returned to the BCE, do not dispose of lockset and cylinder. ii. Remove and dispose of 2ea. steel doors and frames. 1. Ensure minimal damage occurs to surroundings. iii. Replace existing doors with new aluminum storefront doors and frames, details provided below. Height 85-1/2 inches Width 35-5/8 inches Thickness 1-3/4 inches Material Aluminum Glazing Reflective Glass 1/2-in Stile Narrow Hardware Panic Bar, Lockset (w/BEST 7-pin CoreMax System), push/pull handle/plate, kick plate, hinges Color Match Existing iv. Contractor shall confirm all measurements in the field. Any discrepancies shall be communicated to the Base Civil Engineer (BCE) prior to purchase of all materials. v. Glazing shall minimize ability to view inside guard shack from the exterior.
