Specifications include, but are not limited to: 1. Electric buses must meet the Buy American requirements of FAA under 49 USC section 50101 or have a Type III waiver per 49 USC section 50101 (b)(3). 2. The Buses must be designed to meet Federal, State and Local the Americans with Disabilities Act (ADA) regulations for safe and comfortable accessibility for disabled passengers. Passenger doors and doorways comply with ADA requirements, including ability to be navigated by a mobility aid device, such as a wheelchair, and include one powered wheelchair ramp. 3. Buses shall comply with all applicable Federal Motor Carrier Safety Regulations (FMCSR), Federal Motor Vehicle Safety Standards (FMVSS) quality and safety standards. Buses shall comply with and DOT and National Fire Protection Association (NFPA) rules, recommendations, and regulations that apply at the time of delivery. 4. All equipment and component parts furnished shall meet all requirements of these Specifications and be in operating condition at time of delivery. 5. The electric buses shall be low-floor, purpose-built for electric battery power, not converted from other fuel engine purpose of approximate 35-foot in length with all-electric powertrain, composite vehicle body, and a power battery capacity with universal charging system.
