Specifications include, but are not limited to: STATION, TEST 84 IN x 3 IN, 5 TERMINAL 1. Test Station shall be yellow pipe, 3 inch diameter and 84 inches long. 2. The black cap shall be fixed to the yellow artwork sleeve and secured to the test station with 1 #2 Philips screw. 3. Test station shall be a 5 wire internal terminal that is delivered without wire. 4. Artwork shall be screen printed to the sleeve. 5. All artwork shall be preapproved by City Utilities Natural Gas Standards Committee. (CU 303516) COMPACT DUCTILE IRON TEE, 6 INCH MECHANICAL JOINT X 6 INCH MECHANICAL JOINT X 4 INCH MECHANICAL JOINT PER THE FOLLOWING SPECIFICATIONS: 1. CONFORM TO AWWA C153,LATEST REVISION 2. PRESSURE RATED AT 350 PSI, MINIMUM 3. MECHANICAL JOINT ENDS PER AWWA C111, LATEST REVISION. OMIT MECHANICAL JOINT ACCESSORIES. 4. CEMENT MORTAR LINING PER AWWA C104, LATEST REVISION 5. ALTERNATE INTERNAL AND EXTERNAL EPOXY COATING THAT MEETS OR EXCEEDS THE REQUIREMENTS OF AWWA C116 IS ACCEPTABLE. ADAPTER, 4 INCH MJ x MJ, PER THE FOLLOWING SPECIFICATIONS: 1. CONFORM TO AWWA C110 AND C153, LATEST REVISION 2. SHALL BE CONSTRUCTED OF DUCTILE IRON CONFORMING TO ASTM A536, LATEST REVISION 3. ADAPTER SHALL BE EXPOXY COATED THAT CONFORMS TO NSF-61 AND AWWA C116, LATEST REVISION 4. SHALL INCLUDE ALL MECHANICAL JOINT ACCESSORIES SUCH AS GASKET AND BOLTS. 5. GASKET SHALL BE STYRENE BUTADIENE RUBBER AND CONFORM TO AWWA 111, LATEST REVISON 6. BOLTS AND NUTS SHALL BE FLUROCARBON COATED AND CONFORM TO AWWA C111, LATEST REVISION
