Specifications include, but are not limited to: Supplier to provide a quote for each line (address for each location is listed on line). (1) Upright Scale and (1) Wheelchair Scale for the CRS Anniston Location, (1) Upright Scale and (1) Wheelchair Scale for the CRS Gadsden Location, (1) Standing Scale, (1) Infant Scale and (2) Wheelchair Scales for the CRS Homewood Location, (1) Floor Scale, (1) Infantometer, (1) Baby Balance Scale and (3) Wheelchair Scales for the CRS Huntsville Location, (1) Infantometer and (1) Wheelchair Scale for the CRS Muscle Shoals Location, (1) Infant Scale and (1) Wheelchair Scale for the CRS Selma Location, (1) Infant Scale and (1) Wheelchair Scale for the CRS Tuscaloosa Location, (1) Upright Scale, (1) Infant Scale and (1) Wheelchair Scale for the CRS Birmingham Location, and (1) Supplier to include fuel cost/fuel surcharge for providing calibration services to all ADRS CRS locations. Work To Include: To inspect and test with certified test weights. Make adjustments to restore and or maintain accuracy of scale to conform to NIST standards. Visually inspect understructure of scale weighbridge assembly and advise of extent of repairs needed (if applicable). Provide instruction and advise employees of proper operation and maintenance procedures. Furnish report of condition and maintenance procedures and condition of scale after inspection. Supplier to include all labor, materials and supplies (for each line) necessary to calibrate scales. Supplier must have ISO 17025 Accreditation to perform work. Please enter amount on each line as one lump sum when considering requirements requested. Service must be setup with locations within 60 days of purchase order award. Contacts for each location will be provided to awarded supplier. Supplier must be no further than 120 miles from farthest location (Muscle Shoals, AL.) For the Alabama Department of Rehabilitation Services. Required Item CRS Anniston Supplier to provide a quote for each line. To include the following: Visually inspect understructure of scale weighbridge assembly and advise of extent of repairs needed (if applicable). Provide instruction and advise employees of proper operation and maintenance procedures. Furnish report of condition and maintenance procedures and condition of scale after inspection. Supplier to include all labor, materials, and supplies (for each line) necessary to calibrate scales. Supplier must have ISO 17025 Accreditation to perform work. Please enter amount on each line as one lump sum when considering requirements requested. Service must be setup with locations within 60 days of purchase order award. Contacts for each location will be provided to awarded supplier. Supplier must be no further than 120 miles from farthest location (Muscle Shoals, AL.). For the Alabama Department of Rehabilitation Services. (1) Upright Scale and (1) Wheelchair Scale for the CRS Anniston Location. Supplier to inspect and test with certified test weights. Make adjustments to restore and or maintain accuracy of scale to conform to NIST standards. Address is as follows: ADRS, CRS Anniston, 1910 Coleman Road, Anniston, AL. 36207 93879 - Scales and Weighing Apparatus, Hospital, Laboratory and Testing Types Only, Maintenance and Repair 1.00 Each 2 Required Item CRS Gadsden (1) Upright Scale and (1) Wheelchair Scale for the CRS Gadsden Location. Supplier to inspect and test with certified test weights. Make adjustments to restore and or maintain accuracy of scale to conform to NIST standards. Address is as follows: ADRS, CRS Gadsden, 1100 George Wallace Drive, Gadsden, AL. 35903 93879 - Scales and Weighing Apparatus, Hospital, Laboratory and Testing Types Only, Maintenance and Repair 1.00 Each 3 Required Item CRS Homewood (1) Standing Scale, (1) Infant Scale and (2) Wheelchair Scales for the CRS Homewood Location. Supplier to inspect and test with certified test weights. Make adjustments to restore and or maintain accuracy of scale to conform to NIST standards. Address is as follows: ADRS, CRS Homewood, 236 Goodwin Crest Drive, Homewood, AL. 35209 93879 - Scales and Weighing Apparatus, Hospital, Laboratory and Testing Types Only, Maintenance and Repair 1.00 Each 4 Required Item CRS Huntsville (1) Floor Scale, (1) Infantometer, (1) Baby Balance Scale and (3) Wheelchair Scales for the CRS Huntsville Location. Supplier to inspect and test with certified test weights. Make adjustments to restore and or maintain accuracy of scale to conform to NIST standards. Address is as follows: ADRS, CRS Huntsville, 3000 Johnson Road, SW, Huntsville, AL. 35805 93879 - Scales and Weighing Apparatus, Hospital, Laboratory and Testing Types Only, Maintenance and Repair 1.00 Each 5 Required Item CRS Muscle Shoals (1) Infantometer and (1) Wheelchair Scale for the CRS Muscle Shoals Location. Supplier to inspect and test with certified test weights. Make adjustments to restore and or maintain accuracy of scale to conform to NIST standards. Address is as follows: ADRS, CRS Muscle Shoals, 1615 Trojan Drive, Suite 2, Muscle Shoals, AL. 35661 93879 - Scales and Weighing Apparatus, Hospital, Laboratory and Testing Types Only, Maintenance and Repair 1.00 Each
