Specifications include, but are not limited to: The airboat shall be fully operational upon delivery. The airboat shall conform to all federal, state, and marine safety regulations. The airboat shall be constructed in accordance with or exceed industry standards for this type of vessel. Marine Grade Aluminum Alloy. HULL - Hull shall be 16 - 18’ long with at least 3/16” aluminum hull. Transom height at least 22”. 3/8” UHMW black polymer nut & bolted or riveted with 5/16” rivets countersunk on bottom of hull. 4-6” walk-around with support gussets. There shall be a flat non-skidded aluminum deck. At least two drain plugs. Preferably accessible from outside the boat. No grass rake. SEATING - Rear operator seating. Two-three passenger front seating. Storage basket under operator seating. High grade vinyl seat covers and rain covers (choice of color). PROPELLER GUARD - To fit 80” propeller with a minimum clearance of 3”. Wire on propeller guard made of stainless steel. Shroud shall extend all the way down to deck on both sides for safety. Guard to be separate part of engine stand and removable to work on unit. Coast guard approved running lights installed on overhead. Stainless steel tabs welded onto prop guard for installation of steering cable, wire loom, etc with aluminum rubber coated clamps...
