Specifications include, but are not limited to: Construct New Office 12’ x 12’ Inside Existing Building Frame, insulate, install gypsum board and tackboard per the specifications. Reconfiguring HVAC return and supply. In addition, ensure at a minimum of two electrical receptacle and two data drops in the office. Install District standard doorframe, door and lock. Electrical/Data Connect building power to main 440 volt panel approximately 30 feet from building. Install a 30 amp breaker, run a single phase in a 1” conduit to power a 25 KVA transformer. Provide and install a 25 KVA transformer Remove and replace 100 amp panel Remove and replace all power and low voltage conductors, conduit, junction boxes. Remove electrical raceways Run phone and data lines to signal room Provide and install phone and data drops 10 data drops to the room Provide and install hardwired with battery backup smoke detector.
