Specifications include, but are not limited to: COLD WATER METERS (AMR) - 1.5 Inch” Cold Water Ultrasonic, static meter with no moving parts, Bronze Construction Meter, with Encoded Hz Resolution register. NOTES: Please Note: Item 1 on the bid proposal form is for the complete installation package for each of the 15 meters including the following: 15 meters with port(s) with encoder register. 1. Meters shall be Ultrasonic, static meters with no moving parts. These shall equal or exceed all requirements of the latest applicable AWWA Standards. Item VI shall be equal to or exceed all requirements of the latest applicable AWWA Standard C702. a. Meters shall be of brass, Stainless Steel or bronze case type with stainless steel bolts. b. The register shall have a resolution of Cubic Feet. c. Wiring methods shall include the options of use with an Itron-brand 100W Ert for easy plug-and-play to mating endpoint with an encoded register. d. The Register shall be encased in an integral non-corrosive plastic housing, with the electronics, display, and battery completely potted within. It must be permanently epoxy sealed to provide moisture resistance to flooded pit or submerged conditions. The permanent seal between the lens and non-corrosive plastic housing shall utilize an adhesive seal without the use of gaskets. with an absolute encoder register with a leak indicator. The register must be available as either factory pre-wired to an endpoint or factory prewired to an Itron-brand inline connector that can be used to connect to an approved endpoint...
