Specifications include, but are not limited to: Soils shall be classified using the Unified Soil Classification System per ASTM D2487 / AASHTO M 145. Identifying and describing soils shall be per ASTM D2488 / AASHTO M 145. 3.1.3 Determination of the percent of fractured aggregate as per M.A.S.S. Section 20.22 Leveling Course, Article 22.2 Material shall be reported on each leveling course sample. 3.1.4 All sieve analysis reports shall include a graphical depiction with the applicable specification limits superimposed. Sieve analysis final reports will be required within thirty six (36) hours following sample collection. 3.1.5 In-place field density reports shall include the following: Test location, field unit weight, measured percent moisture, maximum unit weight applied, percent compaction, and percent plus three-fourths inch (3/4”) material equated. In-place density final reports will be required within twenty-four (24) hours following testing...
