Specifications include, but are not limited to: MBB Assembly DRY FREIGHT VAN BODY 16FT NOMINAL 1 0.001 SUBFRAME 3" I-BEAM CROSSMEMBERS ON 12" CENTERS WITH 6" CHANNEL LONGRAIL 1 647.17 MYLAR TAPE IS APPLIED BETWEEN ALL STEEL SUBFRAME COMPONENTS AND EXTRUDED ALUMINUM LOWER BOTTOM RAILS TO PREVENT CORROSION 1 0.17 MOUNTING FULL MOUNT-U BOLT 1 89.86 WOODEN CRUSHER BLOCKS IN THE CHASSIS FRAME AT EACH U-BOLT 8 13.84 MUDFLAPS-24"X30" BLACK MORGAN 1 16.62 FLOOR 1 1/8 IN. LAMINATED HARDWOOD FASTENED TO SUBFRAME. FLOOR BOARDS ARE SHIP LAPPED AND PRE-UNDERCOATED FOR PROTECTION FROM ELEMENTS. 1 546.74 MOUNTING UNDERCOATING WATER BASED UNDERCOATING APPLIED TO ROADSIDE AND CURBSIDE EXTERIOR AND INTERIOR OF LONG RAILS AND WHEEL PANS, AS APPLICABLE, EXCLUDING ALL OTHER FLOOR AND SUBFRAME EXTERIOR COMPONENTS 16 6.56 THRESHOLD STEEL GALVANIZED ANGLE FLUSH TO REAR 1 7.18 REAR DOOR MORGAN STANDARD REAR OVERHEAD DOOR 1 300.32 SPACER KIT FOR REAR DOOR INSTALLATION 1 1.69 VINYL SEAL KIT WITH MONOBOLTED OVERHEAD DOOR 1 3.93 REAR FRAME HEADER SUB-COMPONENT GALVANNEALED WITH STANDARD LIGHTS 1 57.03 ENDPLATE SUB-COMPONENT FOR DRY FREIGHT FOR OVERHEAD DOOR V-GROOVE ENDPLATE FOR 4.12" AND 4.38" V-GROOVE ENDPLATE FOR QUICK MOUNT LIFTGATE. 1 74.94 REAR FRAME POST REINFORCEMENT FOR SINGLE LAMP POSTS 1 8.78 SKINS-SIDES .040 ALUMINUM PREPAINTED WHITE 1 132.56 RIVETS FOR FRONT AND SIDEWALLS-16 BODY 1 3.15 SIDE WALL MORGAN STANDARD SIDE WALL WITH LIGHT WEIGHT ALUMINUM HAT POSTS ON 16"CENTERS CURBSIDE 1 93.321 MORGAN STANDARD SIDE WALL WITH LIGHT WEIGHT ALUMINUM HAT POSTS ON 16"CENTERS ROADSIDE 1 93.321 SCUFF SCUFF-SIDE SOLID HARDWOOD 3/4" X 11" HIGH WITHOUT A LINER 2 88.22 Scuff Height Note Side SCUFF HEIGHT TOTALS 10.5 INCHES HIGH 1 0.001 INTERIOR TIES SIDE SLAT 3/4" X 5-1/2" SOLID HARDWOOD 10 220 Int. Ties-Slat ES 5Rows Sides Note LOCATE SLATS AT: (ROW1)32" (ROW2)40" (ROW3)58" (ROW4)68" (ROW5)78" CENTERLINE TO FLOOR 1 0.001 INTERIOR TIES SIDE SERIES E-TRACK, POST MOUNTED 4 125.32
