Remove existing layer of fiberglass / asphalt shingles and dispose of in accordance with local standards. B. The two portions of the roof circled in Appendix B is to receive all new decking of nominal thickness of ½ or better. Underlayment materials are required to comply with ASTM D 226, D 1970, D 4869 and D 6757 shall bear a label indicating compliance to the standard designation and, if applicable, type classification indicated in Table R905.1.1(1). C. Plywood seams on entire structure to be taped per Chapter 9 Roof Assemblies (Amd) R905.1.1 A minimum 4-inch-wide (102 mm) strip of self-adhering polymer-modified bitumen membrane complying with ASTM D 1970, installed in accordance with the manufacturer’s instructions for the deck material, shall be applied over all joints in the roof decking. Underlayment shall be applied over the entire roof and over the 4-inchwide (102 mm) membrane strips and shall be applied in accordance with Table R905.1.1(2). D. Underlayment shall be installed per manufacture recommendations, in compliance with Table R905.1.1(3) and shall comply with 1507.2.3, 1507.2.4, and 1507.2.8 of the state building code. E. Ice and water shall be installed at the intersection of the manscape and shed roof on the south east portion of the building. In accordance of 1507.2.9.2 of the state building code F. Install new white rake and drip edges on entire structure in accordance with 1507.2.9.3 of the state building code. G. New architectural asphalt shingles and cap shall be installed according to manufactural recommendations and shall comply with 1507.2.5 and 1507.2.9.1of the state building code. Fasteners shall be galvanized or stainless steel and shall comply with 1507.2.6 of the state building code. According to manufacture recommendations.
