Specifications include, but are not limited to: Living Room 1. Demo the existing carpet and remove properly to General Contractor provided dumpster. Provide and install new “Shaw Floors Model #HD90405077” LVP glue down waterproof flooring as available at Home Depot. No substitutions without prior approval from Project Coordinator. When a decision is made to entertain alternate product types; that proposed flooring specification will be shared with all competing contractors for their pricing. General Contractor must provide samples for Elder Homeowner color selection. 2. Remove old and provide new Framerica Luxury Vinyl Plank Flooring Base Board. This product covers the expansion gap between the floor and the wall. Color selection will be coordinated and made by the Elder Homeowner upon final flooring color selection. 3. Replace the two (2) blinds in the living room. Provide and install Horizontal Louver Blinds. See MLBO Spec. Book Division 12, page 187. Kitchen / Dining Room 4. Demo the existing flooring and remove properly to General Contractor provided dumpster. Provide the Shaw Floors Model #HD90405077. 5. Remove and dispose of existing, provide and install all new Framerica LVP Flooring base board. Include new base at the center island. 6. Provide and install Broan Nutone ducted black undercabinet range hood complete with all external ventilation duct and roof penetration work. Make necessary shingle repair and ensure that the new contractor provided materials and roof boot are flashed and sealed properly. Provide all necessary electrical, mechanical, roofing and kitchen interior carpentry, painting and decorating complete. Conceal venting in a new cabinet. 7. Replace six (6) cabinet door fronts with best finish match possible. Remove the cabinet pulls while cleaning up all of the cabinets and door fronts. Re-install the existing pulls. 8. Re-inforce the center island top connection to the center island base cabinets. This will be done with angled supports and or “Simpson” type connectors that attach the top and base cabinets together. 9. Remove and dispose of the bi-fold doors from the closet immediately adjacent the dining area. Provide and install new bi-fold doors complete with new hardware. Doors will be pre-finished to match wood tone. 10.Remove and dispose of front door. Provide and replace the entire door and frame with a matching door. There is a side light at this location that can be salvaged with a properly matching door. Provide new hardware including lever and lock, deadbolt and new keys, hinges. 11. Provide and install new front screen door to match the entry door and sidelight at main entrance off of dining area. 12. Provide and install two (2) new horizontal louver blinds in dining room.
