Specifications include, but are not limited to: This project is for the installation of an asphalt wearing course on top of the existing asphalt surface for the parking lots and drive areas. A general description of this work includes: a. General site preparation for the work, b. Identify and make minor repairs as needed including wedging or filling any potholes in the areas, c. Cut back edges of the asphalt where asphalt butts up against yard area, d. Mill the existing surface at butts to concrete curbing, around drain structures and any other similar locations where the new surface bevels into adjoining surfaces e. placement and compaction of new 1.5” asphalt wearing course unless otherwise specified f. New striping of the lot and drives with marking paint after the new asphalt has been installed and can accept the paint markings.