The Contractor will construct asphalt curbing (minimum 4” high, 6” width) in all locations where curbs currently exist or where directed by the City Engineer. All curbing shall be compacted with the use of a hand tamper, at a minimum. All driveway aprons shall not exceed 1-1/2” in height at the edge of roadway and gradually slope into existing driveway an average distance of 42”. Costs for all curbing and driveway aprons are considered incidental to the project and no separate pay item will be provided. Curbing shall be placed parallel to the longitudinal direction of the roadway and not in a meandering fashion. Any “ponding” areas within newly paved surfaces shall be removed and replaced in full lane widths as directed by the City Engineer. Milling and resurfacing areas of “ponding” shall be completed at no additional cost to the owner.
