Specifications include, but are not limited to: Jon Boat Specifications • Length of approximately 14 feet minimum to approximately 16 feet maximum • All welded hull, minimum 0.07” marine grade aluminum minimum • V-hull design • Minimum beam 68” • 20” transom height • Minimum hull dry weight of 230 pounds • Portable fuel tank capacity • 4-person capacity minimum • Closed cell foam flotation • Oar locks • Painted exterior • Reinforced stainless steel bow and stern eyes • Mooring cleats (2 minimum; at least one (1) forward, one (1) near stern) Outboard Engine Specifications • Four-stroke outboard engine, 2 cylinder minimum • Minimum of 20 HP • Maximum HP not to exceed 40 HP • Electric start • Tiller steering • Power tilt/trim with power tilt control mounted on tiller handle • Shaft length to match Jon boat transom (20”) • Proper propeller to match vessel • Installed battery with case and hold-down, appropriate cables and wiring from battery to engine. • Portable fuel tank, 5-gallon minimum capacity. • Fuel filter / water separator and fuel lines from portable fuel tank to outboard engine. Trailer Specifications • Trailer to accommodate Jon boat and outboard engine described above • Single axle bunk trailer • Minimum load capacity approximately 1,500 pounds • Poly skids on bunks • 2” trailer ball coupler • Appropriately sized tires • Matching spare tire with mount • Double safety chains • LED lighting for brake, turn signal, etc. as required • PVC load guides • Tie down straps as required • Appropriately sized tongue jack
