Specifications include, but are not limited to: The machine will be installed in a room with the length of 38 feet, width of 24 feet, and height of 12 feet The machine should pass through the door with the width of 7 feet and the height of 9 feet The building is equipped with following electricity, if machine cannot operate using the supplied power, a transformer or phase changer as necessary must be included in the quote: • 480/277 Volt, 3PH 60Hz (30 amps max) • 240/120 Volt, 1PH 60Hz (15 amps max) • 208/120 Volt, 3PH 60Hz (70 amps max) Minimum Qualifications: • All equipment must be new. No used or refurbished equipment will be considered. • Warranty duration information must be provided for each piece of equipment. • All equipment must be provided as soon as reasonably possible. It is requested that the vendor ship items as they are available. • All bids must be inclusive of Freight FOB Destination, Wilsonville, OR Required Specifications: • Minimum build volume approximately: 125 mm ×125 mm × 125 mm (x,y,z) • Laser power: 100 – 300 W • Minimum positional accuracy: 20 microns • Scan speed: 400 - 1200 mm/s • Minimum build rate: 5 cm3 /h • Layer thickness: 20 - 100 microns. • Ability to print a variety of metallic alloys including steels, titanium, aluminum, nickel, and tool steel. • Ability to adjust parameters for printing for use in research application associated with powder alloy development. • Machine must come with safety plan including Safety Data Sheets (SDS) for all supplied chemicals and gasses, OSHA requirement, and Job Safety Analysis (JSA) detailing suggested Personal Protective Equipment (PPE) and common hazards during various machine operations. • Quote must provide information regarding all other items required for machine function including gas and chiller. • Quote must include powder restoring recycling system. • Quote must include materials including minimum of 20 kg of steel, titanium, nickel alloys (H13, Inconel 618, maraging, Ti-6Al-4V, SS316. • Quote must include training and three-year maintenance. • Quote must include the cost of shipping and installation.