Specifications include, but are not limited to: Provide all scope of work shown on the plans and specifications, including all site work, site demolition to existing asphalt paving, tree removal and or tree trimming, demo drive entrance fencing/gate, demo existing underground utilities and or re-routing of existing underground utilities, all demo work as shown on the site demo plan or elsewhere on the drawings. Provide new finish site work, in general, consisting of new asphalt paving and base, site signage, building signage, concrete walkways, and base, trenching & backfill for new utilities or re-routed of existing utilities, grading, building pad over excavation for new building foundations and underfloor vents, coordination with the modular manufacturer for the placement of the new building onto the new foundations/footings. The contractor is to provide all work and installation of all modular building foundations, gopher slabs, sub-floor vents, reinforcement bars, and hold-downs/anchor bolts for all sill plates by the manufacturer's foundation plans. THE MODULAR BUILDINGS ARE THE PLANS FOR ALL BUILDING FOUNDATIONS INFORMATION, HOWEVER, THERE ARE OTHER DRAWINGS NOT LISTED, I.E., BUILDING SECTIONS AND FRAMING PLANS & DETAILS WHICH ARE INCLUDED IN THE BID PACKAGE THAT MAY BE PERTINENT TO ERECT AND INSTALL THE REQUIRED FOUNDATION HARDWARE OR FOR DIMENSIONS TO COMPLETE & PROVIDE A PROPER FOUNDATION SYSTEM. THE CONTRACTOR SHALL REVIEW ALL STRUCTURAL PLANS TO BE SURE ALL ITEMS TO BE INSTALLED FOR A COMPLETE FOUNDATION SYSTEM ARE NOT OVERLOOKED. Provide all work and installation of all building foundations, anchor plates, hold-bolts, and anchor bolts, embeds by the manufacturer's foundation plans. Once the modular buildings are installed and anchored to the foundation system there is work to be installed to the interior of the modular, i.e., data/communication/fire alarm wiring and devices, and toilet accessories as shown on the drawings. All work shown on the electrical, mechanical, and plumbing drawings and all work as shown on all drawings, documents, addenda, and as described in all specification sections.