Specifications include, but are not limited to: 1. Furnish labor and equipment to clean all debris from existing gutter system and refasten any loose metal / copper components needed. 2. Furnish and install 60 mil EPDM single ply membrane that will line existing gutter and cover the top outer edge of fascia. a. 60 mil membrane is to be adhered to existing copper with manufacturer’s bonding adhesive. b. New outlet tubes is to be installed at downspout locations and stripped in with manufacturer’s flashing tape. c. All corners and details to be flashed with factory corners, t-joint patches, and flashing tapes. d. EPDM membrane to be BLACK in color. 3. Furnish and install 24-gauge prefinished metal drip edge flashing at top of built-in gutter fascia that matches existing. a. Drip flashing metal to be WHITE in color that matches existing. 4. All trash related to DRI to be picked up and placed in onsite container that will be disposed of properly at landfill upon job completion. 5. Furnish onsite portable toilet for employee use. 6. Furnish DRI 2-year workmanship warranty on all labor performed. 7. Furnish manufacturer’s paint finish warranty on all prefinished metal installed.
