Specifications include, but are not limited to: Base Bid (orange section of map) - BB.Mill specified area colored in orange to 2.5 inches of depth and dispose of the grindings at an authorized dump site. (Approximately 32,000 s/f) CC. Adjust elevations of drainage structures as necessary to provide for proper drainage. DD. Provide power sweeper and vacuum truck to ensure a clean area for asphalt to adhere. EE.Repair or regrade any area where asphalt will not properly hold or cure. FF. Prime entire area with SS-1 emulsion liquid asphalt primer or equivalent. GG.Install 3” of hot bituminous asphalt surface mix, to be compacted to 2.5”. HH.Restripe parking lot according to current configuration. i. All parking spaces must be lined in yellow ii. All handicapped parking spots must have a blue box painted, with standard white emblem inside. iii. All arrows or lane lines are to be in white. Alternate Bid #1 (yellow section of map) - II. Mill specified area colored in yellow to 2.5 inches of depth and dispose of the grindings at an authorized dump site. (Approximately 12,500 s/f) ii. Adjust elevations of drainage structures as necessary to provide for proper drainage. iii. Provide power sweeper and vacuum truck to ensure a clean area for asphalt to adhere. iv. Repair or regrade any area where asphalt will not properly hold or cure. v. Prime entire area with SS-1 emulsion liquid asphalt primer or equivalent. vi. Install 3” of hot bituminous asphalt surface mix, to be compacted to 2.5”. vii. Restripe parking lot according to current configuration. i. All parking spaces must be lined in yellow ii. All handicapped parking spots must have a blue box painted, with standard white emblem inside. iii. All arrows or lane lines are to be in white.