Specifications include, but are not limited to: 1. Contractor shall be responsible for the design, fabrication and installation of five new double-faced, internally lit monument signs in accordance with the attached documents: a. A1 – Typical Monument Sign Design 2. Contractor is responsible for securing all permits and confirming that the signs meet all of the associated municipality’s codes. Any drawings, sketches, calculations, engineering certifications and/or seals, surveying, permit fees, inspection fees, and any other requirements of the municipality for obtaining permit shall be provided by Sign Contractor and included in submitted price. 3. This sign should be waterproof and/or weatherproof, as necessary to protect electronics. 4. Contractor to provide submittal drawings for each sign as well as material samples to the Library for review before proceeding with the manufacture of the final product. 5. The Contractor will be responsible for the demolition and removal of all 5 existing monument signs and associated lighting. 6. Contractor to coordinate and include all electrical work needed for this process. 7. The internal illumination of the new sign should create a solid and even glow similar to that seen from the monument sign at 1412 S. Spoede Road. The light should not create a banding effect on the surface of the sign. 8. Contractor to coordinate new concrete work for the base, where required. 9. The design of these signs should be similar to the one installed at 1412 S. Spoede Road. We will have a Pre-Bid meeting on May 13 at 9:00 AM at this location for bidders to look at the current signage construction. 10. Coordinate all scheduling and building access with Library’s Manager of Facilities...
