Specifications include, but are not limited to: A. Algonac Community Schools (ACS) is requesting bids from qualified vendors for concrete slabs, areas of new asphalt, areas of asphalt replacement and repair/patch, crackseal, sealcoat and restripe of existing asphalt of the Algonac Jr/Sr High School and Pointe Tremble Elementary parking lots and driveway areas. Campus is located at 5200 Taft Rd and 9541 Phelps Rd, Algonac MI 48001. B. ACS is located in southeastern Michigan at the north end of Lake St. Clair. ACS services the city of Algonac as well as Clay and IRA townships. ACS has approximately 1500 students, 170 professional staff and 4 USAC E-Rate eligible buildings utilizing broadband internet access. C. This RFP has been published for the purpose of soliciting proposals for the aforementioned equipment and is considered confidential. No portion of this RFP may be used, reproduced, or disclosed. D. Although cost must be considered, other factors will influence the awarded vendor. Product availability, voluntary alternates, product life cycle, warranty, etc. will all be considered. E. The School District will issue purchase orders for the project. Bidder, if awarded a contract, agrees to begin the process immediately following receipt of an "Algonac Community Schools Purchase Order Form" and will fully complete work in accordance with the Bid Proposal Form and/or agreed upon schedule. If a vendor proposes a specific contract be used, it must be included with the proposal submission. Section I – Concrete Slabs Areas of Grey on Area Markup Document ● Fueling Station Concrete Pad (approx 30’ x 100’) o Saw cut and remove existing asphalt. Excavate area for prep of concrete slab, 12”. Apply 6” crush concrete or other suitable base for concrete. Pour 6” reinforced concrete slab level with surrounding asphalt. ● Bus Parking Area ( approx 33’ x 201’) o Saw cut and remove existing asphalt. Excavate area for prep of concrete slab, 12”. Apply 6” crush concrete or other suitable base for concrete. Pour 6” reinforced concrete slab level with surrounding asphalt Section II - Areas of New Asphalt Areas of Yellow on Area Markup Document Warrantee all areas of new asphalt for no less than one year ● Excavate area to receive new asphalt. ● Provide base material as needed ● Apply two, 2” layers of heavy duty hot mix asphalt o Area 1 ( approx 12’ x 107’ ) o Area 2 ( approx 7’ x 55’ ) o Area 3 ( approx 40’ rad half circle, approx 2513 sqft) Section III - Areas of Asphalt Replacement Areas of Red on Area Markup Document Warrantee all areas of replaced asphalt for no less than one year ● Excavate area to receive asphalt. ● Provide base material as needed ● Apply two, 2” layers of heavy duty hot mix asphalt o Area 1 ( approx 13’ x 200’ ) o Area 2 ( approx 15’ x 350’ and 22’ x 80’ ) o Area 3 ( approx 25’ x 227’ and 28’ x 64’ ) o Section IV - Repair/Patch, Crackseal, Sealcoat and Restripe of Existing Asphalt Areas of Purple on Area Markup Document ● Patch/Repair o Repair all potholes or other surface damage prior to topcoating with appropriate hot patch material ● Crackseal o Seal all cracks in asphalt ● Sealcoat ○ Sealcoat all asphalt surface areas with appropriate asphalt sealcoat material