Specifications include, but are not limited to: (CU 102288) SADDLE TYPE CROSSARM PIN WITH 1" LEAD THREAD FOR 3-3/4" X 4-3/4" WOOD CROSSARM, SUPPLIED WITH TWO (2) 5/8" X 7" CARRAGE BOLTS, TWO (2) 5/8" SQUARE NUTS, TWO (2) 5/8" MF LOCK NUTS, AND WASHER PLATE. TO BE HOT DIP GALVANIZED. ; (CU 104071) ALUMINUM CONDUCTOR CLAMP WITH GALVANIZED STEEL HARDWARE USED TO SECURE 636 26/7 A.C.S.R. CONDUCTOR WITH ARMOR ROD. CLAMP TO HAVE APPROXIMATE CONDUCTOR DIAMETER RANGE OF 1.50" TO 2.00". CLAMP TO BE COMPATIBLE WITH 25 KV HORIZONTAL POST INSULATOR (CU 104159). ; (CU 107097) STREET LIGHT PEDESTAL TO BE CYLINDRICAL IN SHAPE WITH A MINIMUM SIZE AS LISTED BELOW: * DEPTH - 19 INCHES DIAMETER OF TOP - 8 INCHES DIAMETER OF BOTTOM - 10-1/2 INCHES * THE BASE AND COVER OF THE ENCLOSURE ARE TO BE CONSTRUCTED OF HIGH DENSITY POLYETHYLENE, U.V. STABILIZED. THE ENCLOSURE SHALL HAVE A GREEN MOLDED-IN COLOR. * THE COVER SHALL HAVE A NON SKID SURFACE, BE CLEARLY IMPRINTED "ELECTRIC", AND HAVE TWO (2) CAPTIVE STAINLESS STEEL PENTAHEAD BOLTS FOR ATTACHING IT TO THE BASE. NO ADDITIONAL LOCKING PROVISIONS SHALL BE REQUIRED. * THE BASE SHALL HAVE A FLANGE AROUND ITS BOTTOM TO PREVENT FROST HEAVING OR TILTING. THE UNIT IS TO WITHSTAND A VERTICAL LOAD OF 5000 POUNDS APPLIED ON A 6 INCH X 6 INCH AREA OF THE CENTER OF THE COVER WITHOUT DAMAGE.
