Specifications include, but are not limited to: The Cherokee Nation is seeking bids from a qualified Modular home manufacturer. Bids shall include all materials, equipment, finishes, transportation, logistics, communications, permits and fees for the complete construction, delivery, assembly, placement and commissioning of the specified home. The modular home specifications are included in this bid packet. The homes will be delivered and set-up at designated sites throughout the fourteen (14) county Cherokee Nation Reservation. Modular home manufacturer shall include all materials, equipment, finishes, transportation, logistics, communications, permits and fees for the complete construction, delivery, assembly, placement and commissioning of the specified home. Homes shall be “Off-Frame” installed onto owner provided footings and stem walls. All attachment/fastening materials, labor and equipment shall be covered by the home installer. Homes shall be IRC Compliant. Bidder/Contractor shall include IRC compliance certificates with bidding package. Bidders/Contractors are to include product specifications with bid submittal for the Owner’s review. Home orders and delivery sites shall be supplied to the manufacturer on an as needed basis by the Cherokee Nation, via Purchase Order. Supply line item cost for modular home type one (1), 1400-1500 SF with a 3 bedroom/2 bath layout as typical, with specifications as follows: • 30 year architectural shingles. • Synthetic underlayment over 3/4” decking • 2x4 Exterior walls framed 16” OC, R-15 minimum for all exterior walls • 4/12 pitch trusses, minimum • Attic insulation to meet R-40, minimum • Floor joists to be minimum of 2x10 for off frame install • Floor insulation to meet R-30, minimum • 2x3 interior wall, framed at 16” OC. • All interior walls to receive R-13 sounds batts • Exterior Sheathing to be 7/16” minimum • Exterior siding to be fiber cement lap or board and batten style. Manufacturer to provide two (2) color options • Exterior windows to be thermally broken, single hung, vinyl frame with standard interior window treatments • Front and rear doors shall be insulated with integral view upper panes • Kitchen to have upper and lower cabinets as designed by manufacturer • Counter tops shall be Formica or solid surface with 4” integral back splash • Full depth kitchen sink with single hole faucet • Kitchen sink shall receive 1/3hp, switched garbage disposal • Kitchen shall receive electric full size range/oven combo • Bathrooms to receive vanity, sink and three hole faucets