Specifications include, but are not limited to: A. The importance of maintaining the systems and their components in a safe and satisfactory operating condition requires that the services be performed by a contractor who is regularly engaged with his own personnel in the installation, maintenance, and service of all ADA and Automatic doors of the grade and design installed on the campus of Rowan University. B. The successful bidder shall maintain a twenty-four (24) hour service capability with sufficient manpower, equipment, and vehicles to assure emergency repair response and be at the job site within one (1) hour of the notification for all interior and exterior repairs. The determination as to which jobs are to be considered emergency jobs shall be made by the University. C. If the contractor is summoned for work outside of regular work hours, 7:30 a.m. to 4:30 p.m., he/she shall report directly to the University Department of Public Safety upon arriving and departing from the campus. D. The contractor shall not take any ADA and Automatic door out of service unless permission is first obtained from the Director of Facilities Operations or his/her designee. E. Guarantee: The contract shall fully guarantee all workmanship and parts furnished and installed under this contract against defect for one (1) year after completion. Defects will be repaired or replaced at no charge to Rowan University. F. To maintain the operating integrity of the system, only parts made by the original manufacturer, Horton series, or other authorized replacement parts manufacturer, will be an acceptable replacement. Parts are to be installed in accordance with the manufacturer’s written recommendations. G. The contractor shall fully guarantee all workmanship and parts furnished and installed under this contract against defect for one (1) year after completion. Defects will be repaired or replaced at no charge to Rowan University. H. Any specialized equipment required by the contractor to perform the services under this contract shall be provided at no additional cost to Rowan University. I. Only companies who are qualified will be permitted to submit a bid on this work and must be an Authorized Manufacture Representative of the Horton Series, Yale, Stanley, Von Duprin, or Doromatic. J. All service Technicians are required to be Association of American Automatic Door Manufacturers (AADM) Certified. Supply a list of all service technicians’ names and copy of certification.