Specifications include, but are not limited to: A 3-point tractor-mounted fraise mower capable of removing unwanted surface matter to a maximum depth of two inches in a single pass. Unit to have the following features: • Mounts to a tractor with hydrostatic drive or true creeper gear; 540 PTO; 4-wheel drive; 2 x double acting spool with a hydraulic flow of 13.2 GPM min. • Capable of coupling to the tractor’s 3-point hitch system using Cat I or Cat II pins. • 4-post individual height adjustment enabling infinite precision on the fly without the need for tools to change height. • Height adjustments to have locking mechanisms and numerical readouts for adjusting. • 161 Single tipped style blades mounted to rotor in a spiral pattern which feeds fraised material to center of rotor eliminating witness lines from the edge of fraised path. • Blades to mount to rotor with a single bolt and nut. • Single tungsten-tipped blades available in optional thickness of 3/16” (10 mm), 3/8” (5mm) or 1/8” (3mm). • Ability to use single rotor with same single tipped blades to finesse turf canopy, remove thatch organic material or total soil removal without changing blades or rotor. • The rear collection belt (directly behind rotor) is mounted at angle to catch fraised material providing complete surface hygiene and assisting with centering the fraised material onto belt and minimized belt traveling & wear. • Ability to leave elevating conveyor in the stored or folded position, enabling the windrowing of fraised materials. • Working width of 63”. • Transport width does not exceed 90”. • The working width of unit with elevating conveyor extended not to exceed 160”. • Weight not to exceed 2000 lbs. • An optional mid-roller attachment available to assist with the following of contours.