Specifications include, but are not limited to: Item No. 1: Tandem Axle, deck over, tag along trailer Applicable Publications and Standards: Shall meet or exceed all City, State, and Federal safety guidelines and standards Shall meet all OSHA applicable guidelines and standards Tag Trailer Specifications: Payload Capacity shall be a minimum of 40,000 lbs. 20’ main deck length minimum, 22’ maximum main deck length Beaver Tail shall be Minimum of 60” maximum length of 72” with self-cleaning angle iron slats for traction. Deck Width shall be a maximum of 102” Tongue Length shall be a minimum of 60”, maximum of 76” Deck Height shall be a maximum height of 36” loaded, 38” unloaded Deck Type shall be 2” nominal hardwood (2) ladder style ramps with a maximum length of 72”, self-cleaning angle iron, spring assisted up and down with attached handles. Maximum lifting force to stow and deploy ramps shall be 40lb. Main Frame shall be I beam/rail construction Smooth outer side rails shall have flat outer edge so that D-ring tie downs are not recessed within an I beam profile. (2) axles with a minimum 22,500 lb. rating each, oil bath lubricated hubs. Wheels and tires shall meet or exceed axle manufacture recommendation Slipper spring style suspension 3” adjustable height pintle eye with weight rating to exceed GVWR of trailer Minimum 25,000 lb. drop leg two speed parking jack without handle extension so that the operator can operate the jack while standing inside the overall width of the trailer for protection from passing traffic. self-adjusting air brakes with park brake feature on a minimum of 1 axle. 1 axle minimum shall be equipped with fully modulated ABS system. Tie Downs, minimum of (16) D-Rings (one set centered on beavertail). 6 of the D-rings shall be located in the bucket well. ODOT approved LED lights, sealed wiring harness with 7pin Round style vehicle connector. HD safety chains w/GVWR-rated grab hooks Bucket well/attachment pocket shall be recessed between the trailer main frame rails with a minimum length of 4ft and a minimum height of 12inches. Tool box with a lockable lid located on tongue Primed & painted black, with reflective tape full length on each side of trailer. Spare wheel and tire assembly shall be shipped loose with the trailer Cone holder shall be installed on the tongue of the trailer by the jack. Trailer must be delivered with Title filed in Franklin County Ohio Trailer must come with two sets of owner’s manuals